What are the precautions in the use of mining machinery?

Mining machinery and equipment is an important part of the mining enterprises. As the scale of mine production and construction continues to expand and the degree of mechanization continues to increase, the technical level of maintenance and maintenance of equipment must be improved accordingly. Correct operation equipment Timely maintenance equipment, reasonable maintenance and maintenance equipment can prolong the service life of equipment, restore the technical performance of electromechanical equipment, eliminate faults and eliminate hidden troubles, ensure the reliability of equipment, maximize the potential of equipment, and effectively improve production. Benefits, reducing production costs, is also an effective way for mining companies to grow and develop. There are still many technical and conceptual problems in the current mine maintenance. A brief summary of the matters to be noted in the use of mining machinery and equipment is now carried out:
First, when walking in the main alley, track up and down the mountain, and fully mechanized mining face, the pedestrians in the roadway disrepair area should observe first and then pass quickly. It is strictly forbidden to stop at the disrepair area. Through the roadway maintenance work area, you must first greet the personnel in the area and wait until you allow it to pass quickly.
Second, in the alleys, tracks up and down the mountain, fully mechanized mining face wind lanes, strictly abide by the "no pedestrians" system, prohibiting play and trouble.
3. If there is a vehicle passing through the main road, you should hide in a spacious space of the roadway with a width of not less than 400mm from the side of the road or hide in the sheltered cave nearby to avoid “squatting, smashing, jumping”.
4. When walking in the alleys of the main road, the track and the mountain, and the fully mechanized mining face, it is necessary to walk on the sidewalks on both sides of the roadway. It is strictly forbidden to walk in the middle of the track.
5. Pedestrians are strictly forbidden to walk on the carrier and take the belt; they must walk across the bridge when walking across the loader and belt.
6. Walking on the track and down the mountain. If you suddenly drive on the way, you should hide in time to avoid the diverticulum.
7. Pedestrians must go up and down the safe exit when entering and exiting the mining face. It is strictly forbidden to cross the nose and tail of the mining face.
8. Pedestrians must pass the two-way advance support, the shed work area, the equipment maintenance area, the relevant pull frame, the push-slip operation area, and the coal-cutting area. They should greet the relevant operators in advance, and they can pass quickly without permission. Stay in the above area.
IX. When walking in the wind tunnel of fully mechanized mining face, if you suddenly drive on the road, you should hide in time to avoid the spaciousness of the roadway with a width of not less than 400mm from the side of the road.
10. When walking in the main alley, listen to the signal sent by the motor car during operation. It is strictly forbidden to overtake the car. It is strictly forbidden to cross the middle of the mine car.
XI. Pay attention to the integrity of the roof when walking on the noodle. It must be on the corner of the bracket. It is strictly forbidden to walk close to the coal wall. It is forbidden to take the transport plane.

pressure washer accessories